Waterproofing primers

For waterproofing masonry, concrete, reinforced concrete, lightweight concrete, for screeds, plaster floors, plaster walls, masonry material made of brick, CETRIS and drywall construction. A permanently elastic two-component waterproofing sealant based on polymer suspension, suitable under tiling for balconies, terraces and loggias. Designed for waterproofing under wall and floor tiles in bathrooms, swimming pools and water tanks. Increases efficiency when sealing strips and passes are applied to corners, nooks and expansion joints. Each pack contains powder and liquid ingredients. Resistant to water pressure. Thanks to its extremely high adhesion to substrates, it is also suitable for anti-corrosion coatings of steel structures. Depending on the objective, method of application and the absorbency of the substrate, the mix can consist of 10 to 15% water. The second layer can be applied after 24 hours. Usable life is about 4 hours.

Note: Use liquid elastic waterproofing when reducing downtime is a requirement. You can apply additional layers immediately after the previous one dries. Moreover, this single-component sealant eliminates the concern of mixing two components.

For permanently elastic seals for contact and corner joints, passages in walls and floors, drains in pools, tanks and showers. Withstands a wide range of temperatures, salts, diluted acids and alkalis. Permanently elastic rubber strip based on a special polypropylene fabric with alkaline protection, provided with a rubber coating. After the application of liquid paperboard (S-T8) or liquid elastic waterproofing, it creates flexibly sealed corner joints in walls and floors. The system also includes: internal and external corner and elastic grommet.

Ready-to-go, single-component, semi-liquid compound based on polymer dispersion. After drying, the compound creates a highly elastic, tight, water-repellent coating with good adhesion to the substrate. Intended to provide a waterproof coating under ceramic wall and floor tiles indoors with increased humidity: bathrooms, showers, toilets, laundry rooms, basements, kitchens, sink basins, vegetable sorting areas, catering facilities, etc. Applied to substrates: concrete, cement , lime-cement plaster, masonry with full joints, walls made of silicate and fired brick, and aerated concrete. Cement fiber boards, drywall, plywood and OSB. Concrete, cement, and anhydrite floors.

Ready-to-go, single-component, semi-liquid compound based on polymer dispersion. After drying, the compound creates a highly elastic, tight, water-repellent coating with good adhesion to the substrate. Intended to provide waterproof coatings under ceramic wall and floor tiles in the interiors and exteriors of buildings: balconies, terraces, loggias, wet rooms, bathrooms, showers, toilets, laundry rooms, basements, kitchens, washrooms, etc. Applied to surfaces: concrete, cement, lime-cement plaster, masonry with full joints, walls from silicate and fired brick, and aerated concrete. Concrete, cement, and anhydrite floors. Increases efficiency when sealing strips and passes are applied to corners, nooks and expansion joints.

It consists of a three-layer membrane inserted into an adhesive screed beneath ceramic tiles, thereby protecting upper layers of flooring from moisture and the disruptive effects of an unstable substrate. The upper layer of the membrane consists of a reinforcing grid, the middle layer of a waterproof HDPE membrane, and the bottom layer of non-woven polypropylene.