Valve actuators/ automation

Manual actuators for the operation of industrial 1/4-turn valves 
1/4 turn handle Length 180 - 260 - 330 or 530 mm, lockable in on/off positions - in 9 intermediate positions or in any position

Design 
Double-acting pneumatic actuator for mounting on quarter-turn valves (butterfly valves or ball valves). Top flange to ISO 5211. Control pressure up to 8 bar. Can be mounted on various types of valve stem ends (square end, flat end or key). Force transmission via rack-and-pinion, scotch-yoke or patented Amri yoke kinematics provides output torques of up to 16000 Nm which are ideal for actuating quarter-turn valves. ACTAIR is equipped with a visual position indicator and adjustable travel stops for open/ closed position as standard. Manual override can be provided on request. For automated valve actuation, ACTAIR can be combined with AMTROBOX, AMTRONIC, SMARTRONIC or any other control unit with VDI/VDE 3845 interface. 
Applications 
All applications in water, energy and industrial engineering.

Design 
Electric actuator for mounting on butterfly valves or ball valves. Top flange ISO 5211. Power supply : single-phase ac, three-phase or d.c with torque limitation, travel stop and open closed signalling as standard. For on /off control and throttling duties. With integrated local control and remote control. 
Applications 
All applications in water, energy and industrial engineering.

Design 
Double-acting hydraulic actuator for mounting on quarter-turn valves (butterfly valves or ball valves). Top flange to ISO 5211. Control pressure up to 120 bar. Can be mounted on various types of valve stem ends (square end, flat end or key). Force transmission via rack-and-pinion, scotch-yoke or patented Amri yoke kinematics provides output torques of up to 125000 Nm which are ideal for actuating quarter-turn valves. ACTO is equipped with a visual position indicator and adjustable travel stops for open/closed position as standard. Manual override can be provided on request. The following accessories are available for hydraulic control: - Shut-off valve - Hydraulic locking - Emergency shutdown (ESD) ACTO can be combined with all AMTROBOX control units. 
Applications 
All applications in water, energy and industrial engineering.

Design 
Multi-functional control unit for open/closed position signalling on on/off valves via mechanical limit switches or proximity sensors. AMTROBOX (R1149) is mounted directly on reducer type MR, the pneumatic actuators of the ACTAIR series and the hydraulic actuators of the ACTO series. AMTROBOX EEx ia (R1172): intrinsically safe version for potentially explosive atmospheres. AMTROBOX ATEX (X1140, X1149): ATEX version for potentially explosive dust atmospheres (Zone 22). 
Applications 
All applications in water, energy and industrial engineering.

Design 
AMTRONIC provides On / Off control of pneumatic quarter-turn actuators as well as open / closed position detection. It is mounted directly on ACTAIR or DYNACTAIR actuators without a bracket, resulting in a compact and robust integrated solution. Its integrated pneumatic valve eliminates the need for any pneumatic piping between AMTRONIC and the actuator. Actuating time can be set at the AMTRONIC by adjusting the outlet flow. AMTRONIC can be connected to field bus systems Profibus DP and AS-i. AMTRONIC BUS is designed to simplify wiring of the control units. Connection via field bus cable provides power supply and exchange of control data with the process control system. AMTRONIC BUS is compatible with field bus networks, particularly Profibus DP and AS-i . 
Applications 
All applications in water, energy and industrial engineering.

Design 
BOATRONIC M-2 for measured regulation of BOA-Control IMS valves or with BOATRONIC M-420 for permanent digital signal transfer (flow and temperature) from the sensor of the BOA-Control IMS regulating valve e.g. to a control room. 
 

Centered disc butterfly valve with elastomer liner (EPDM XC or Nitrile K). 
With electric actuator. Semi-lug type body (T2), full-lug type body (T4), U-section body with flat faces (T5). Body types T2, T4 and T5 are suitable for downstream dismantling and dead-end service. Valve disc made of nodular cast iron or stainless steel. EN, ASME connections possible. Electric actuator by BERNARD CONTROLS: LE/SD type series for on/off control or positioning through proportional control (4-20 mA) 
Engineering contractors, for water, crude oil and oils. Shut-off and 
control duties in water management, water supply, water treatment, drainage and irrigation.

Design 
Butterfly valve for building services, with anti-condensation feature, elastomer liner (EPDM XU). With electric actuator. Semi-lug type body (type T2), suitable for downstream dismantling and dead-end service. Valve disc made of nickel-coated nodular cast iron. Connections to EN possible. Electric actuator by BERNARD CONTROLS: LE / SD type series for on/off control. 
Applications 
Heating, ventilation, air-conditioning. 

Design 
Butterfly valve for building services, with anti-condensation feature, elastomer liner (EPDM XU or Nitrile K). With electric actuator. Full-lug type body (T4), suitable for downstream dismantling and dead-end service. Valve disc made of stainless steel 1.4308. Connections to EN possible. Electric actuator by BERNARD CONTROLS: LE / SD type series for on/off control. 
Applications 
Heating, ventilation, air-conditioning, for drinking water.

Design 
Single-acting pneumatic actuator for mounting on quarter-turn valves (butterfly valves or ball valves). Top flange to ISO 5211. Control pressure up to 8 bar. Can be mounted on various types of valve stem ends (square end, flat end or key). Force transmission via rack-and-pinion, scotch-yoke or patented Amri yoke kinematics provides output torques of up to 8000 Nm which are ideal for actuating quarter-turn valves. Reset to fail-safe position is effected by means of spring assemblies if control air supply is interrupted. DYNACTAIR is equipped with a visual position indicator and adjustable travel stops for open/closed position as standard. Manual override can be provided on request (up to DYNACTAIR 100). For automated valve actuation, DYNACTAIR can be combined with AMTROBOX, AMTRONIC, SMARTRONIC or any other control unit with VDI/VDE 3845 interface 
Applications 
All applications in water, energy and industrial engineering.

Design 
Single-acting hydraulic actuator for mounting on quarter-turn valves (butterfly valves or ball valves). Top flange to ISO 5211. Control pressure up to 120 bar. Can be mounted on various types of valve stem ends (square end, flat end or key). Force transmission via rack-and-pinion, scotch-yoke or patented Amri yoke kinematics provides output torques of up to 4000 Nm which are ideal for actuating quarter-turn valves. Reset to fail-safe position is effected by means of spring assemblies if control fluid supply is interrupted. DYNACTO is equipped with a visual position indicator and adjustable travel stops for open/closed position as standard. Manual override can be provided on request (up to DYNACTO 100). The following accessories are available for hydraulic control: - Shut-off valve - Hydraulic locking - Emergency shutdown (ESD) - Hydraulic hand pump DYNACTO can be combined with all AMTROBOX control units. 
Applications 
All applications in water, energy and industrial engineering.

Design 
Single-acting hydraulic actuator for mounting on quarter-turn valves (butterfly valves or ball valves). Top flange to ISO 5211. Control pressure up to 120 bar. Can be mounted on various types of valve stem ends (square end, flat end or key). Force transmission via rack-and-pinion, scotch-yoke or patented Amri yoke kinematics provides output torques of up to 16000 Nm which are ideal for actuating quarter-turn valves. Reset to fail-safe position is effected by means of a pressurised nitrogen cartridge if control fluid supply is interrupted. ENNACTO is equipped with a visual position indicator and adjustable travel stops for open/closed position as standard. The following accessories are available for hydraulic control: - Hydraulic hand pump ENNACTO can be combined with all AMTROBOX control units.

Design 
Manual actuators for the operation of quarter-turn valves. MA range manual gearbox, irreversible planetary gear kinematics, operation by handwheel. 
Applications 
Building services, industrial processes.

Design 
Manual actuators for the operation of quarter-turn valves. MN range manual gearbox, worm gear kinematics, operation by handwheel. 
Applications 
Building services, industrial processes, water and industrial applications in non-corrosive and non-saline environments.

Design 
Manual actuators for the operation of quarter-turn valves. MR range manual gearbox, irreversible worm gear or scotch-yoke kinematics. Standard operation by handwheel. Models MR 400 to 1600 can be retrofitted with electric actuators. Options include alternative operating mechanisms, limit switches, etc.
Applications 
Building services, industry and process engineering, water, waste water, energy, oil and gas, mining and dredging, shipbuilding.

Design 
MAT-P type LAP Pneumatic piston actuator in heavy duty design for industrial use on globe and gate valves, DIN/ISO 5210 mounting flange. Available in single-acting design with opening / closing spring or in double-acting design; suitable for mounting limit switches or positioners to suit customer requirements, factory-mounted. Settings are adjusted during factory test run. 
Applications 
Pneumatic piston actuators are designed for valves with a linear stem movement (globe, diaphragm and gate valves). They are suitable for building services, industrial plants, power stations, the food and beverages industries and the chemical industry. Pneumatic actuators can also be used in potentially explosive atmospheres.

Design 
Multi-turn actuators for diaphragm valves with rising stem, max. closing force 60,000 N, configurable as a function of flow characteristics and valve travel; open / closed position detection; factory-mounted. 
Applications 
Building services, industry, power stations, food industry, chemical industry.