Revolving doors
Maximum safety
Safety is paramount when choosing the right entrance systems for public institutions where children, disabled and elderly people enter frequently. The revolving doors are the ultimate in quality, suitable for high usage entrances, such as shopping malls, department stores, hotels, banks administration buildings, etc. There is more to the doors than meet the eye! The doors are equipped with the drive and control unit made in Swiss reputable company TORMAX. The drives, which reliability, safety and service life was verified by series of intensive testing, use AC motors with powerful braking effort which is the most important safety factor. Sophisticated control system provides an adjustable speed control, smooth, quiet and a trouble free operation and monitoring of all safety equipment.
Additionally to the safety operation, the revolving doors, because of separation of outdoor and indoor environments, also meet further operational demands, namely for reduction of thermal losses during heating of buildings, whereas in summer seasons they keep an efficiency of air conditioning systems. Furthermore, the revolving doors prevent from draft, dust and noise from outside and separate incoming and outgoing people. We, as the only one producer in Europe, supplie our doors with an automatic door wing folding (break-out system) to enable a safety evacuation of people and easy access of trouble troops during emergency and panic situations.
Revolving doors are made in following types:
CLASSIC Small (CS)-ADMIN
- made of steel , lined with aluminum profiles
- three or four wings
- mechanical and/or automatic design
- 2000mm – 3800mm in diameter
- central axle
- night closure – optional
- panic (break-out) system – mechanical and/or automatic
Excellent workmanship meets classic design. Door wing frames as well as curved fixed walls and canopy are made of welded steel structure with aluminum cladding in RAL color shades. The canopy compartment in which the drive is installed measures 300mm including rain-water drainage system. Optionally the frames and the canopy can be faced with ground and/or polished stainless steel profiles. Glazing of the door wings and fixed rounded walls is made of safety glass. The door is equipped with the drive and control unit made in Swiss reputable company TORMAX. The drives, which reliability, safety and service life was verified by series of intensive testing, use AC motors with powerful braking effort which is the most important safety factor. Sophisticated control system provides an easy control and a trouble free operation and monitoring of all safety equipment.
Additionally to the safety operation, the revolving doors, because of separation of outdoor and indoor environments, also meet further operational demands, namely for reduction of thermal losses during heating of buildings, whereas in summer seasons they keep an efficiency of air conditioning systems. Furthermore, the revolving doors prevent from draft, dust and noise from outside and separate incoming and outgoing people.
The doors are made within 1600mm to 3800mm diameter and are suitable for frequent entries into administration buildings, hotels, banks, etc.
CLASSIC Large (CL)-HYPER
- made of steel , lined with aluminum profiles
- three or four wings
- always automatic design
- 4200mm – 6000mm in diameter
- central showcase
- night closure – optional
- panic (break-out) system – mechanical and/or automatic
Excellent workmanship meets classic design. Door wing frames as well as curved fixed walls and canopy are made of welded steel structure with aluminum cladding in RAL color shades. The canopy compartment in which the drive is installed including rain-water drainage system measures from 300mm to 400mm depending on whether it is furnished with an automatic break-out system (folded door wings) or not. Instead of centre column, the door is equipped with a showcase. Glazing of the door wings and fixed rounded walls is made of safety glass. The door is equipped with the drive and control unit made in Swiss reputable company TORMAX. The drives, which reliability, safety and service life was verified by series of intensive testing, use AC motors with powerful braking effort which is the most important safety factor. Sophisticated control system provides an easy control and a trouble free operation and monitoring of all safety equipment.
Additionally to the safety operation, the revolving doors, because of separation of outdoor and indoor environments, also meet further operational demands, namely for reduction of thermal losses during heating of buildings, whereas in summer seasons they keep an efficiency of air conditioning systems. Furthermore, the revolving doors prevent from draft, dust and noise from outside and separate incoming and outgoing people.
The doors are made within 4200mm to 6000mm diameter and are generally installed as entrance/exit gateways to shopping malls and buildings with high passage capacity.
LIGHT FRAME (LF)
- made of aluminum slim profiles
- three or four wings
- mechanical and/or automatic design
- 1600mm – 2600mm in diameter
- central axle
- night closure – optional
- panic (break-out) system – mechanical and/or automatic
It is hard to imagine that revolving doors could be so light and yet so tough. The lightness is achieved by using extra slim (20mm x 40mm) aluminum framing profiles both on door wings and curved walls. A canopy including a rain-water drainage system measures mere 110mm in mechanical design, and/or with driving unit concealed in the floor in automatic design. In case the driving unit is installed in the canopy, its height increases to 220mm. Door leaves are made of hardened safety glass while a glazing of curved enclosure walls is made of laminated glass. The door is equipped with the drive and control unit made in Swiss reputable company TORMAX. The drives, which reliability, safety and service life was verified by series of intensive testing, use AC motors with powerful braking effort which is the most important safety factor. Sophisticated control system provides an easy control and a trouble free operation and monitoring of all safety equipment.
Additionally to the safety operation, the revolving doors, because of separation of outdoor and indoor environments, also meet further operational demands, namely for reduction of thermal losses during heating of buildings, whereas in summer seasons they keep an efficiency of air conditioning systems. Furthermore, the revolving doors prevent from draft, dust and noise from outside and separate incoming and outgoing people.
The doors are made within 1800mm to 2600mm diameter and are suitable for frequent entries into administration buildings, hotels, banks, etc.
FULL GLASS (FG)
- canopy made of glass
- frames made of ground stainless steel
- three or four wings
- 160mm – 2600mm in diameter
- made of aluminum slim profiles
- three or four wings
- mechanical and/or automatic design
- 1600mm – 2600mm in diameter
- central axle
- night closure – optional
- panic (break-out) system – mechanical and/or automatic
Futuristic, light and bright design which is, as the name says it, almost completely made of glass. Door leaves are made of hardened safety glass while a glazing of curved enclosure walls is made of laminated glass. Extra slim (20mm x 40mm) aluminum framing profiles both on door wings and curved walls are lined with ground and/or polished stainless steel cladding. A canopy is completely made of safety glass and framed with stainless steel rim the height of which is mere 30mm. The door is equipped with the drive that is installed in the floor and control unit made in Swiss reputable company TORMAX. The drives, reliability, safety and service life of which was verified by series of intensive testing, use AC motors with powerful braking effort which is the most important safety factor. Sophisticated control system provides an easy control and a trouble free operation and monitoring of all safety equipment.
Additionally to the safety operation, the revolving doors, because of separation of outdoor and indoor environments, also meet further operational demands, namely for reduction of thermal losses during heating of buildings, whereas in summer seasons they keep an efficiency of air conditioning systems. Furthermore, the revolving doors prevent from draft, dust and noise from outside and separate incoming and outgoing people.
The doors are made within 1600mm to 2600mm diameter and have been especially developed for entries in glass facades thus creating complex transparent effect.
Are you interested in this product? Contact us using form below or contact us directly on e-mail info@mrs.cz or call +420 545 175 844 or +420 602 707 001.