Penetration coatings

Low-viscous liquid consisting of water-dispersed SOKRAT styrene-acrylic polymer, miscible with water in any ratio. The evaporation of water creates a continuous, smooth and slightly sticky film. Mainly used as an additive for lime, lime-cement, cement and mortar mixtures, as well as for the production of spray plaster for permanently damp and alkaline environments. Also used as a primer under facade coating material and under sealants S-T1, S-T5 (requires dilution). When used as a primer, the dilution ratio with water is from 1:6 to 1:10.

A single-component, low-viscous liquid consisting of water-dispersed SOKRAT styrene-acrylic polymer, creating a hard transparent polymer water-insoluble film. Reduces and unifies the absorbency of the substrate and increases the adhesion of subsequent layers. Used as a primer under the core penetration and final plaster, facade and interior painting. Also used to increase the adhesion of construction glues, self-leveling material, etc. Diluted in water at a ratio of 1:2 to 1:4.

High-quality penetrator used to unify and reduce the absorbency of substrates before applying self-leveling flooring materials and bonding tiles, for the localized repair of concrete surfaces, concrete floors, brick walls and plaster, or before painting walls or facades. Compared to the conventional S2802A, it has up to 25% higher penetration efficiency and reaches a depth of at least 20 mm at full saturation; strengthens the base, increase water-repellent capability and improves adhesion to the subsequent upper layer. Creates a barrier effect – suppresses capillary action of soluble salts from the substrate.

For strengthening and priming old and new substrates such as formica, concrete, enamel paints, tiles, hardwood fiber board, plaster and for under cement adhesives; intended for bonding cladding and tiles, for under self-leveling material, liquid paperboard S-T8 , liquid elastic waterproofing, filler spatula repair for concrete, QUARTZ INFILL, etc. For very absorbent substrates, the bonding bridge is diluted at a maximum ratio of 1: 0.5 (bonding bridge : water). Consumption approximately 0.2 kg/m²