Instalation of Ceramic Tiles
Akrinol
Ceramic Tiles Adhesive
Area of usage
AKRINOL is a dry mix cement-based multipurpose construction adhesive suitable for exterior and interior use. It is suitable for fixing ceramic tiles, clinker brick, glass and other mosaics to non-problematic wall surfaces (lime, lime-cement and cement plasters/renders) and floor surfaces (concrete, cement overlays). It is suitable for underfloor heating areas. It can be also used as an adhesive for the aerated concrete blocks.
AKRINOL is water and freeze resistant and temperature resistant (-40°C – +70°C). Foot Traffic: after 12 hours.
Application
Usage per square meter
2 to 3 kgPackaging
5.00 kg, 20.00 kgBest before in months
12 months, 6 monthsStorage
Storage in dry and air spaces.
Akrinol Elastik
Ceramic Tiles Flexible Adhesive
Area of usage
AKRINOL ELASTIK is a cement-based polymer modified flexible (high performance) adhesive suitable for exterior and interior use. It is suitable for fixing ceramic tiles, clinker brick, glass and other mosaics to wall and floor surfaces, especially to problematic surfaces: gypsum-cardboard and fiber-cement boards, gypsum plasters, aerated concrete, particle boards. It is suitable for underfloor heating areas and also for fixing the ceramic tiles on old ceramic linings.
It is water and freeze resistant and temperature resistant (-40°C – +70°C).
Foot Traffic: after 12 hours.
Application
Usage per square meter
2 to 3 kgPackaging
5.00 kg, 20.00 kgBest before in months
12 months, 6 monthsStorage
Storage in dry and air spaces.
Akrinol Forte
Two-Component Adhesive Mortar
Area of usage
AKRINOL FORTE is a cement-based two-component flexible (high performance) construction adhesive. Component B is a special water-based acrylic emulsion. It is used for fixing of heavier ceramics tiles and thinner slabs made of natural or artificial stone (max. weight: up to 30 kg/m2) to non-problematic exterior and interior wall surfaces. It can be also used for fixing the EPS and XPS boards.
It is water and freeze resistant and temperature resistant (-40°C – +70°C). Foot Traffic: after 12 hours.
Usage per square meter
For gluing 3,5 kgPackaging
5.00 kg, 20.00 kgBest before in months
12 months, 6 monthsStorage
Storage in dry and air spaces.
Joint Filler 1–10MM
Area of usage
JOINT FILLER 1-10 is a ready mixed cement based grout for 1-10 mm wide joints between ceramic tiles. It can be used inside and outside. It is water-repellant and resistant to freezing. Temperature resistant (-40°C - +80°C).
Foot Traffic: after 24 hours. Colour Range: 20 shades according to the colour card.
Application
Usage per square meter
0,5 to 1 kgPackaging
20.00 kgBest before in months
6 monthsStorage
Storage in dry and air spaces.
Are you interested in this product? Contact us using form below or contact us directly on e-mail info@mrs.cz or call +420 545 175 844 or +420 602 707 001.