Embossed film

Embossed film

Studded film (80.30)

Studded film

 

Insulation against ground moisture with a ventilation/drainage function and stud height of 8 mm.  An elastic molded membrane using the latest air-gap technology.  It consists of a film used for foundation work and simple drainage, providing ventilation for damp walls and preventing water from penetrating the structure from the surrounding terrain. The film can be used in all weather conditions and up to a depth of 5 m under normal circumstances with immediate backfill. Also usable as insulation against radon, with a moderate to high index, penetrating the building from the subsoil.

Advantages:

  • Permanent protection
  • Simple application
  • Maintains the permeability of the subsoil

 

Metal nail with washer (80.30)

Metal nail with washer

For securing studded film to masonry special metal nails with sealing plugs matching the size of the studs are used. To prevent leakage, a seal can be made by placing trim on the edges, so-called finishing trim on the top edge. The use of the product Antiradon STOP is recommended for joints.

 

Finishing trim NPF (80.30)

Finishing trim NPF

 

For securing studded film to masonry, special metal nails with sealing plugs matching the size of the studs are used. To prevent leakage, a seal can be made by placing trim on the edges, so-called finishing trim on the top edge. The use of the product Antiradon STOP is recommended for joints.

 

Anti radon STOP (80.33)

Anti radon STOP

 

For bonding and sealing bituminous insulation, SBS modified bituminous insulation, anti-radon HDPE insulation joints, emergency repairs under damp and wet conditions (in the rain), filling and sealing cracks, crevices, holes, and gaps in construction material.

Characteristics:

  • Resistant to the penetration of radon from the soil
  • Repels moisture, water and the effects of weather
  • Low diffusion coefficient of radon
  • Permanently plastic even at large temperature differences
  • Very high adhesion to most building materials even under wet conditions
  • Can be painted over after curing with bituminous-based paints
  • Not easily flammable

Are you interested in this product? Contact us using form below or contact us directly on e-mail info@mrs.cz or call +420 545 175 844 or +420 602 707 001.

Ask a question about this product

Columns marked by * are required.

Kód