Cleaning and protection equipment
-
DESCALING PUMPS
-
CHEMICALS FOR DISCALING PUMPS
-
FIRE-SIDE BOILER CLEANING PRODUCTS
-
LIQUIDS FOR CLEANING AND PROTECTION
DESCALING PUMPS:
|
DOS 25 V4V serves for removing scale from sanitary water heat exchangers, heating circuits, storage water heaters, boilers etc. The pump is equipped with a 4-way valve enabling reverse flow of the descaling liquid and thus better results in cleaning.
TARTARUGA V4V is a lighter and easily portable pump for less demanding applications. It is also equipped with a 4-way valve enabling reverse flow of the descaling liquid.
|
|
|
|
Technical parameters |
DOS V4V |
TARTARUGA V4V |
|
tank volume |
20 liters |
5 liters |
|
flow rate |
max. 56 l/min |
18 l/min |
|
connection |
1/2″ |
1/2″ |
|
power supply |
230V / 50Hz |
230V / 50Hz |
|
pump type |
rotary, 230V/50Hz, 165W |
rotary, 230V/50Hz, 50W |
|
dimensions h x w x l |
500 x 355 x 355 (mm) |
350 x 330 x 330 (mm) |
|
weight |
about 6 kg |
4.7 kg |
|
code |
590 |
5990 |
|
CHEMICALS FOR DISCALING PUMPS
|
CLEANING AGENTS: |
Code |
 DETEX - intended for cleaning copper and steel parts. Solution: 1 kg Detex for 6-10 l of water. |
649 |
|
MANTEX SP - for cleaning components in stainless-steel, copper and tin. Dissolve 1 kg Mantex in 6 l water. |
650 |
|
MANTEX SNO - for cleaning aluminum or light alloy parts. |
2134 |
|
NEUTRALIZATION AGENTS: |
Code |
|
N105 - liquid for neutralization of residual acidity after cleaning. |
4006 |
|
pH METR - a digital tester helps in checking the acidity of descaling solutions, range 0-14 pH, accuracy ±0.2 pH, suitable for all current measurements of acid solutions. The measured value is shown within seconds, the battery will last for some 700 hours of continuous measurement. |
652 |
|
|
FIRE-SIDE BOILER CLEANING PRODUCTS
|
GAS-FIRED BOILERS: |
Code |
|
METANOTHERM - liquid combustion deposit remover. Its chemical reaction will clean heat transfer surfaces that cannot be reached by manual cleaning methods. It is especially suitable for cleaning gas-to-water heat exchangers in wall-hung boilers. Supplied as a spray or in 10-l plastic cans. |
spray: |
1977 |
|
10-l plastic can: |
424 |
|
OIL-FIRED BOILERS: |
Code |
|
EC-MIX - non-toxic powder combustion deposit remover for oil-fired boilers. It is introduced into the combustion chamberand after the boiler is fired, the combustion chamber and all the heat transfer surfaces will be cleaned. |
1368 |
|
|
LIQUIDS FOR CLEANING AND PROTECTION
|
HEATING SYSTEMS: |
Code |
|
MR 501/R - concentrated alkalic scale dissolving corrosion inhibitor for heating systems. The dislodged scale and other impurities are purged by flushing the system 2 to 3 weeks after its application. Concentration: 2 kg M501/R for 80-100 l water. |
433 |
MR 501/F and MR 501/96P - give preventive corrosion protection by forming a protective film on the surface. They are mixable with anti-freeze liquids (e.g. for solar systems). Older heating systems should be cleansed prior to the application by using MR 501/R liquid first.
MR 501/F - gives preventive corrosion protection to metal materials (iron, copper, aluminum etc.) and their alloys. 1 kg M501/F shall be diluted in 100 l water.
MR 501/96P - is intended esp. for heating systems containing plastic components (e.g. underfloor heating). It prevents algae growth and gas formation. 1 kg M501/96P shall be diluted in 100 l water. |
M 501/F: |
434 |
|
MR - 501/96P |
4402 |
|
CORROSION PREVENTION: |
Code |
ZINCOL spray for cold zinc spraying. An excellent surface finish and corrosion protection. Thanks to high
zinc content (95%) the coating never peels off, and the surface can be sprayed without any special pretreatment |
428 |
|
Are you interested in this product? Contact us using form below or contact us directly
on e-mail info@mrs.cz or call +420 545 175
844 or +420 602 707 001.
