Bonding cladding and tiles

A thin-layered cement-based adhesive mortar intended for bonding ceramic wall and floor tiles from natural and artificial stone, plates of varying thicknesses such as lotto, for laying fine-grained stoneware and large-format panels in plaster, concrete, porous concrete and unplastered walls. Also used for bonding tiles for floor heating, for liquid waterproofing coatings such as Liquid paperboard S-T8 and other waterproof materials, old tiles, etc. Ideal for bonding heat-insulating material from polystyrene or mineral wool panels on masonry facades and the subsequent bonding (rendering) of reinforcing fabric.

A thin-layered cement-based adhesive mortar intended for bonding ceramic wall and floor tiles from natural and artificial stone, plates of varying thicknesses, for laying fine-grained stoneware and large-format panels in plaster, concrete, porous concrete and unplastered walls. Also used for bonding tiles for floor heating, for liquid waterproofing coatings such as paperboard such as Liquid adhesive S-T8 and other waterproof materials, old tiles, etc. Ideal for bonding heat-insulating material from polystyrene or mineral wool panels on masonry facades.

A thin-layered cement-based adhesive mortar intended for bonding ceramic wall and floor tiles from natural and artificial stone, plates of varying thicknesses such as lotto, for laying fine-grained stoneware in plaster, concrete, porous concrete and unplastered walls. Also used for bonding tiles for liquid waterproofing coatings such as Liquid paperboard S-T8 and other waterproof materials, old tiles, etc. Ideal for bonding heat-insulating material from polystyrene or mineral wool panels on masonry facades.

A thin-layered cement-based adhesive mortar intended for bonding ceramic wall and floor tiles from natural stone, for laying fine-grained stoneware in plaster, concrete, porous concrete and unplastered walls designed only for interiors (indoor spaces and unheated areas), with no combined load of water and frost. Intended only for spaces burdened by the movement of people, and for thin-film bonding where the thickness of the adhesive bed does not exceed 5 mm. Also used for bonding tile to liquid waterproofing coatings such as Liquid paperboard S-T8 and other waterproof materials. The adhesive can be used for bonding with aerated concrete blocks HEBEL / YTONG.

Balcony trim, balcony corner trim, and the balcony trim connector are pre-prepared fittings for tin-plated balconies, terraces and loggias. Their shape is adapted for the use of adhesives.

A balcony trim connector is a pre-prepared fitting for tin-plated balconies, terraces and loggias. It connects balcony trim and allows it to expand.