Accessories for facade insulation

Thermal insulation material: Polystyrene, mineral wool. Substrate: components made of wood, OSB, chipboards and fiberboards.  Material: polypropylene PP

Insulation product made of expanded polystyrene EPS 70F for plugging embedded dowels in ETICS thermal insulation systems. Easy to use and work with.

Plastic cutter assembly for use in thermal insulation systems. The cutter is adapted to perfectly cut a hole of the exact diameter and depth of the EPS plug. This way you achieve an insulation system without thermal bridges.

Thermal insulation material: Polystyrene EPS, XPS, Substrate: (A) - concrete, (B) - stone, solid brick, (D) - concrete blocks with cellular aggregates, (E) - autoclaving porous concrete, Material: dowel - polypropylene PP, Rod - polyamide .....

Thermal insulation material: Polystyrene EPS, XPS, mineral wool
Substrate: (A)- concrete, (B) - stone, solid brick, (D) - concrete blocks with cellular aggregates, (E) - autoclaving porous concrete
Material: dowel - polypropylene PP,  Rod - steel ...

Thermal insulation material: Polystyrene EPS, XPS
Substrate: (B)- stone, solid bricks, (C) - hollow bricks
Material: dowel – polypropylene PP,
Rod – fiberglass-reinforced polyamide
Length: 140 – 300 mm
ETA-06/0105

Thermal insulation material: Polystyrene EPS, XPS, mineral wool
Substrate: (B) - stone, solid brick, (C) - hollow bricks
Material: dowel - polypropylene PP,
Rod- steel
Length: 140 – 300 mm
ETA-06/0105

Aluminum skirting trim with drip edge. This trim provides accurate and visually clean edges for insulation systems. The 0.8 mm aluminum sheet ensures corrosion resistance and the drip edge prevents water from wicking under the insulation.

A fastening component for connecting skirted bases and finishing sections. Lengths 30 mm, 1,000 mm.

For evening the surface and achieving straightness primarily for skirted (base) sections. Thickness 2; 3; 4; 5; 10 mm.

PVC fiberglass drip fabric resistant to alkali environments. Used to ensure the firm connection of the base section with thermal insulating material in contact with the thermal insulation system - ETICS. Prevents the formation of cracks where the ....

Rendering aluminum corner beads for insulation systems. The corner section is fitted with a fiberglass mesh to reinforce the corners of insulation systems. The high-quality fiberglass mesh ensures a simple connection to the reinforcement of the facade ...

Plastic corner beads for insulation systems. The corner section is fitted with a fiberglass mesh to reinforce the corners of insulation systems. The high-quality fiberglass mesh ensures a simple connection to the reinforcement of the facade ....

Designed to create a solid, but expandable external contact connection between the thermal insulation system and window frames. The advantage is having a double reinforcement layer at the point of maximum stress. This eliminates sealing joints ....

Absorbs sunlight during masonry work, thereby preventing excessive drying when rendering thin layers of plaster, stucco work, etc. Also provides a safe work area on scaffolding and underneath it. Protects pedestrians from falling building material ...

Scraping the edges and surface of EPS. Ideal for thermal insulation systems.

Painting and facade tape, UV-resistant, specially developed for professional use. Easily removable 30 days after application without leaving any adhesive behind. For creating equal transitions in the plaster. Creates sharp lines with its excellent ....